
3170 Network Video Server
Technical Specifications
Video Encoding MJPEG / H.264 (simultaneous dual stream)
Dynamic IP
support
Dynamic IP service using www.ipcctvdns.com
Video channels Analog 1 Input channels & 1 Output Channel (loop through).
Software
(default
Web interface)
Live-cast, PTZ control, search through Web browser
(Minimum PC requirement - XP, 2000, Vista / IE 6.x or later )
Compression
H.264 & MJPEG : 6 levels (low compression / highest / high / normal / low
/ lowest)
Software
(FW-Manager
3.xx)
Supports 16, 25, 36, 64, 128, 256ch ( 9ch freeware available)
Full-featured PC NVR with matrix functionality
( Minimum PC requirement - XP, 2000 / Pentium IV 1.6GHz or above /
256MByte RAM or above / 64MByte video memory or above )
Resolution
[Protocol]
HTTP, RTP/RTSP, Multicast, 3GPP, TCP/IP, ARP, ICMP, Telnet, Ftp,
PPPoE, SMTP, DHCP, NTP, uPNP, and ETC
[SDK]
Open HTTP API / ActiveX for live cast with audio & PTZ
System
Integration
4CIF - 704x480 (NTSC) / 704x576 (PAL)
CIF - 352x240 (NTSC) / 352x288 (PAL)
Features QCIF – 176x112 (NTSC) / 176x144 (PAL)
[Service]
Image upload / notification service / special service for POS integration
Live Casting
Streaming 1 video channels with full duplex live audio
Up to 30/25 fps@ 4CIF (KB) when simplex
Installation and
maintenance
Configuration: installation wizard, HTTP, telnet and console.
Upgrade firmware: HTTP, telnet & ftp
* All specifications are subject to change without prior notice.
Application
FW-3170, 1channel Network Video Server can convert not only analog video, but also serial command into a networked data, FlexWATCH
®
makes it possible to overcome limit of analog CCTV cabling. You can monitor and control site in the remote PC and using Network Media Decoder
that is the counterpart of network video server, you can view and control with conventional analog device.
PC (Web Viewer)
PTZ CameraFW-3170
Internet
Network Media
Decoder
Monitor
CCTV
Keyboard
Audio
Encoding
8 bit PCM, Sampling rates 8KHz, Mono Audio Misc.
OSD (On-Screen Display) / Time-stamp on video
Transmit serial input data with video
Support NTP server
Quick Time & VLC media player compatible for live view
Audio channels 1ch audio-in & 1ch audio-out
System
hardware
32bit RISC CPU / Embedded Linux / 128MByte SDRAM / 8MByte Flash
PTZ support
Built-in PTZ device protocol with more than 30 different PTZ protocols
from Pelco, Vicon, Kalatel, Sony, Panasonic, Canon, Honeywell, etc
Power
Power Supply - SMPS 12V (800mA) [AC100~240V, 50/60Hz]
Power Consumption - DC12Volt, 500mA
UART support
Console, By-pass command to control UART device
X10 device command to control device over power line, Modem Support
( ISDN, PSTN and GSM )
Approvals MIC,FCC, CE, RoHS
Bandwidth
Management
Frame rate control / Bandwidth control / CBR / VBR
Dimension /
Weight
84 (W) x 110 (D) x 35 (H) (in mm)
0.214Kg without Power Supply
[ Trigger Condition ]
Video loss / Video recovered / Motion detection (144 area) /
1ch alarm inputs / Boot finished / Serial input / Schedule
Alarm
Management
(for 1 analog
channels)
[ Alarm Service ]
Image holding service (Max 15.5MByte pre-post alarm buffer)
Image upload service through E-mail / FTP (support pre & post)
Notification service through TCP / UDP / HTTP / 1 alarm outputs
External
Interface
1ch video inputs & 1 composite output (75 ohm/Hi-Z)
10/100-Base-T Ethernet (auto-sensing)
1 photo-coupled or 1 digital inputs (NC/NO selectable), 1 relay outputs
1 audio input / 1 audio output
2 serial ports (COM: RS-232, AUX: RS-232 or RS-485)
Security
Channel based user password protection for live-cast, PTZ, alarm output
and audio
Working
Environment
Temperature : 32~122 F (0~50
O
C)
Humidity : 20~80% RH
Kommentare zu diesen Handbüchern