Seyeon FW1170 Bedienungsanleitung PDF herunterladen (Seite 25)

Technical Specifications

3850 Network Video Server

Video Encoding MJPEG / MPEG-4 Video stream recording

Dynamic IP

support

IP notification by e-mail

AOIP (Always On-IP, http://www.aoip.co.kr)

Video channels Analog 8 Input channels & 1 Output Channel.

Software

(default

Web interface)

Live-cast, PTZ control through Web browser

(Minimum PC requirement - XP, 2000, Vista / IE 6.x or later )

Compression

MPEG-4: 6 levels (low compression / highest / high / normal / low /

lowest), MJEPG: 1 level (highest)

Software

(FW-Manager

3.xx)

Supports 16, 25, 36, 64, 128, 256ch ( 9ch freeware available)

Full-featured PC NVR with matrix functionality

( Minimum PC requirement - XP, 2000 / Pentium IV 1.6GHz or above /

256MByte RAM or above / 64MByte video memory or above )

Resolution

[Protocol]

HTTP, HTTPS, RTP/RTSP, Multicast, 3GPP, TCP/IP, ARP, ICMP, Telnet,

Ftp, PPPoE, SMTP, DHCP, NTP, uPNP, and etc.

[SDK]

Open HTTP API / ActiveX for live-cast with audio

4CIF - 704x480 (NTSC) / 704x576 (PAL)

System

Integration

2CIF - 704x240 (NTSC) / 704x288 (PAL)

CIF - 352x240 (NTSC) / 352x288 (PAL)

Features

QCIF - 176x112 (NTSC) / 176x144 (PAL)

[Service]

Image upload / notification service / special service for POS integration

Live Casting

Streaming 8 video channels with full duplex live audio

Up to 120/100 fps@ CIF (12.5KB) when simplex

Installation and

maintenance

Configuration: installation wizard, HTTP, telnet and console.

Upgrade firmware: HTTP, telnet & ftp

Audio

Encoding

G.723 (4-bit, 8KHz)

Misc.

OSD (On-Screen Display) / Time-stamp on video

Transmit serial input data with video

Support NTP server

Audio channels 8ch audio-in & 1ch audio-out

System

hardware

32bit RISC CPU / Embedded Linux / 64MByte SDRAM / 8MByte Flash

PTZ support

Built-in PTZ device protocol with more than 30 different PTZ protocols

from Pelco, Vicon, Kalatel, Sony, Panasonic, Canon, Honeywell, etc

Power

Power Supply - SMPS 12V (3A) [AC100~240V, 50/60Hz]

Power Consumption - DC12Volt, Normal : 1.5A, Peak : 1.6A

UART support

Console, By-pass command to control UART device

X10 device command to control device over power line, Modem Support

( ISDN, PSTN and GSM )

Approvals FCC, CE, RoHS

Network

Frame rate control / Bandwidth control / CBR / VBR

Dimension /

Weight

215 (W) x 290 (D) x 44(H) (in mm)

1.4Kg(3.08lbs) without Power Supply

[ Trigger Condition ]

Video loss / Video recovered / Motion detection (144 area) /

8ch alarm inputs / Boot finished / Serial input / Schedule

8ch video inputs & 1 composite output, 3x3 Multiplexed display (75

ohm/Hi-Z)

10/100-Base-T Ethernet (auto-sensing)

8 photo-coupled or 8 digital inputs (NC/NO selectable), 8 relay outputs

8 audio input / 1 audio output

Alarm

Management

(for 8 analog

External

[ Alarm Service ]

Image holding service (Max 19.2MByte pre-post alarm buffer)

Image upload service through E-mail / FTP (support pre & post)

Notification service through TCP / UDP / HTTP / 8 alarm outputs

Interface

channels)

2 serial ports(COM: RS-232, AUX: RS-232 or RS-485 of RS-422)

Security

Channel based user password protection for live-cast, PTZ, alarm output

and audio

Working

Environment

Temperature : 41~122 F (5~50

Humidity : 20~80% RH

Accessory

19" 1U rack mount kit

Sold separately

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 47 48

Kommentare zu diesen Handbüchern

Keine Kommentare

Seyeon FW1170 Bedienungsanleitung Seite 25

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitskameras Seyeon FW1170